Part Number Hot Search : 
SMAJ78A S29LV4 BUV28A SG12864 CWCNG22 MAX2530 GN5275K 15KPA40A
Product Description
Full Text Search
 

To Download AA8500AP Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Agamem Microelectronics Inc.
AA8500AP
VIDEO AMPLIFIER
PRELIMINARY
FEATURE 1. Operating voltage 2.8V~5.5V 2. Composite video driver with 6dB gain 3. SAG correction function 4. Low power consumption, 45mw typical 5. Internal voltage clamp circuit DESCRIPTION
AA8500AP is a video driver with 6dB gain, 75 output buffer and SAG correction. The SAG could reduce the output coupling capacitor. It supports 3V and 5V operating voltage, and is ideal for video output device, ranging from portable digital still camera and stationary equipment such as DVD player. The IC is available in 8-pin TSSOP. AA8500AP BLOCK DIAGRAM
1
2006/6/30
Agamem Microelectronics Inc.
AA8500AP
VIDEO AMPLIFIER
PRELIMINARY
PIN DESCRIPTION Symbol N/C IN GND N/C N/C SAG OUT VCC Pin No Type 1 2 3 4 5 6 7 8 I O O N/C pin
Function Composite Y input signal is clamped input Ground N/C pin N/C pin SAG correction to reduce the capacitance of output coupling capacitor Composite video signal output. 2.8V~5.5V power supply
ABSOLUTE MAXIMUM RATING Ta = 25 Parameter Supply Voltage Operating Ambient Temperature Storage Temperature Symbol Vcc Ta Rating MIN -0.3 -25 TYP MAX 7 75 UNIT CONDITION V
Ts
-55
125
NOTE : Stress above those listed under "Absolute Maximum Rating" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for the extended periods of time may affect device reliability. 2 2006/6/30
Agamem Microelectronics Inc.
AA8500AP
VIDEO AMPLIFIER
PRELIMINARY
ELECTRICAL CHARACTERISTICS
Ta = 25 Parameter Supply Current Input terminal voltage Output terminal voltage Voltage gain Frequency Characteristic Clamp Voltage Output DC level Symbol Icc VIN VOUT Gv 0.12 5.7 6.0 Min Typ 15 1.28 0.35 6.3 Max 20 Unit V V
, Vcc = 3V Condition
mA No input Signal
GF
-0.5
-0.5 1.4 1.2
0.5
dB SIN wave: 1V, f=100kHz Input Signal Freq = dB 7MHz/1MHz, 1VP-P, measure VO1 V V
3
2006/6/30
Agamem Microelectronics Inc.
AA8500AP
VIDEO AMPLIFIER
PRELIMINARY
MEASUREMENT CIRCUIT
Vcc 1 NC VCC 8 47uF
0.1uF
1uF
1 2.1v 2
A A
2 VIN OUT 7 To 100uF 75
SW7
VO2 VO1 75
8 5 0
150
3 GND
0 A P
SAG 6
Ts
22uF 400
SW6 0.6v
4 NC
NC 5
4
2006/6/30
Agamem Microelectronics Inc.
AA8500AP
VIDEO AMPLIFIER
PRELIMINARY
TSSOP 8 PACLAGE DIMENSION
NOTES:
1. 2. 3. 4.
Package body sizes exclude mold flash protrusions or gate burrs Tolerance 0.1 (4 mil) unless otherwise specified, Coplanarity:0.1 Controlling dimension is millimeter converted inch dimensions are not necessarily exact Followed from jedec mo-153
SYMBOLS A A1 A2 b C D E E1 e L y
DIMENSIONS IN MILLIMETERS DIMENSIONS IN INCHES MIN --0.05 0.80 0.19 0.09 2.90 6.20 4.30 --0.45 --0 NOM ----1.00 ----3.00 6.40 4.40 0.65 0.60 ----MAX 1.20 0.15 1.05 0.30 0.20 3.10 6.60 4.50 --0.75 0.10 8 MIN --0.002 0.031 0.007 0.004 0.114 0.244 0.169 --0.018 --0 NOM ----0.039 ----0.118 0.252 0.173 0.026 0.024 ----MAX 0.048 0.006 0.041 0.012 0.008 0.122 0.260 0.177 --0.030 0.004 8
5
2006/6/30


▲Up To Search▲   

 
Price & Availability of AA8500AP

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X